2026 Harley-Davidson® Low Rider® S Base
Exterior Colors:
- Year 2026
- Make Harley-Davidson®
- Model Low Rider® S
- Engine Milwaukee-Eight® 117 High Output
2026 Harley-Davidson® Low Rider® S
For Life in the Left LaneFor riders who want more out of every mile, the 2026 Low Rider S brings a sharper edge to factory performance. From its rip-ready suspension to the Heavy Breather intake and performance-tuned 2-into-1 exhaust, this machine is built to cut harder, corner sharper, and rev to the limiter. And with the Milwaukee-Eight® 117 High Output motor and standard Rider Safety Enhancements, it’ll let you ride like you were born for it.
Features may include:
Design That Demands More- Stripped-down style, dialed all the way in. Blacked-out trim, refreshed paint and graphics, and full LED lighting give the 2026 Low Rider S a look that’s as sharp and unapologetic as the ride it delivers.
- Bold graphics and paint sharpen the already aggressive stance on the Low Rider S, with blacked-out trim that keeps the attitude on from tank to tail.
- A 5.75” (146 mm) LED headlamp, LED taillight, and LED turn signals cut through the dark and keep you visible from every angle, day or night, rain or shine.
- The steep-backed solo seat locks you in place so you can ride with the bike, not against it. Launch harder, corner deeper, and stay planted every inch of the way.
- From the deep tone of Dark Billiard Gray to the flash of White Onyx Pearl, there are five distinct colorways to make the Low Rider S yours. Choose chrome or black trim to match your edge, with Blood Orange and Aurora Blue Denim reserved for riders who want their blacked-out bikes to stand out even louder.
- The Milwaukee-Eight 117 High Output motor, Heavy Breather intake, and a performance-tuned 2-into-1 exhaust, paired with a performance-retuned suspension make every twist of the throttle feel like an act of hostility. Taller rear shocks boost lean angle and comfort, so you can learn your limits.
Engine
Engine
Milwaukee-Eight® 117 High Output
Valve train
Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; four valves per cylinder
Bore
4.075 in. (103.5 mm)
Stroke
4.5 in. (114.3 mm)
Displacement
117 cu in (1,923 cc)
Compression Ratio
10.3:1
Fuel System
Electronic Sequential Port Fuel Injection (ESPFI)
Air Cleaner
Heavy Breather intake with synthetic media, washable exposed element
Exhaust
2-into-1; catalyst in header
Lubrication
Pressurized, dry-sump with oil cooler
Dimensions
Length
92.9 in. (2,360 mm)
Overall Width
35 in. (890 mm)
Overall Height
47.4 in. (1,205 mm)
Seat Height, Laden
27 in. (686 mm)
Seat Height, Unladen
28.1 in. (715 mm)
Ground Clearance
Static: 5.7 in. (145 mm)
Rake (steering head) (deg)
28 deg
Fork
Angle: 28 deg
Trail
5.7 in. (145 mm)
Wheelbase
63.6 in. (1,615 mm)
Front Tire
Michelin® Scorcher 31,
Rear Tire
Michelin® Scorcher 31,
Front Tires / Model
Scorcher 31
Tires, Front Specification
110/90B19,62H,BW
Rear Tires / Model
Scorcher 31
Tires, Rear Specification
180/70B16,77H,BW
Fuel Capacity
5 gal. (18.9 l)
Fuel Reserve
1 gal. (3.8 l)
Oil Capacity (w/filter)
5 qt. (4.7 l)
Oil capacity
Transmission: 1 qt. (.95 l ) | Primary Chain Case: 1.25 qt. (1.18 l )
Weight, As Shipped
644 lb. (292 kg)
Weight, In Running Order
670 lb. (304 kg)
GVWR
1,160 lb. (526 kg)
Gross Axle Weight Rating, Front
450 lb. (204 kg)
Gross Axle Weight Rating, Rear
730 lb. (331 kg)
Performance
Engine Torque Testing Method
J1349
Engine Torque
128 ft-lb (174 Nm)
Engine Torque (rpm)
4,000 rpm
Engine Power
114 HP / 85 kW @ 5000 rpm
Lean Angle, Right (deg.)
Testing Method: J1168 | 31.3 deg
Lean Angle, Left (deg.)
Testing Method: J1168 | 31.3 deg
Fuel Economy: Combined City/Hwy
Testing Method: Estimated City/Hwy | 47 mpg (5 l/100 km)
Drivetrain
Primary Drive
Chain, 34/46
Final Drive
Belt, 32/66
Clutch
Mechanical, 10 plate wet, assist & conventional
Transmission
6-Speed Cruise Drive®
Gear Ratios (overall) 1st
9.311
Gear Ratios (overall) 2nd
6.454
Gear Ratios (overall) 3rd
4.793
Gear Ratios (overall) 4th
3.882
Gear Ratios (overall) 5th
3.307
Gear Ratios (overall) 6th
2.79
Chassis
Frame Type
Mild steel, tubular frame; rectangular section backbone; stamped, cast, and forged junctions; MIG welded; aluminum forged fender supports
Swingarm
Mild steel, tubular sections, stamped x-member, forged axle junctions; MIG welded; removable belt spacer
Front Fork
Single cartridge 43 mm inverted with aluminum fork triple clamps; single rate spring
Rear Shocks
Hidden, free piston, coil-over monoshock; 56 mm stroke; hydraulic preload adjustment
Wheel Type, Front
Black, Radiate Cast Aluminum
Front Wheel
Diameter: 19 in. (483 mm) | Width: 2.5 in. (64 mm)
Wheels Type, Rear
Black, Radiate Cast Aluminum
Rear Wheel
Diameter: 16 in. (406 mm) | Width: 5 in. (127 mm)
Brakes, Caliper Type
4-piston fixed front and 2-piston floating rear
Brake System Type
Rotor: Front and rear black, Split 7-spoke floating rotors
Brake Disc Diameter, Front
11.8 in. (300 mm)
Front braking system
Thickness: 0.2 in. (5 mm)
Brake Disc Diameter, Rear
11.5 in. (292 mm)
Rear braking system
Thickness: 0.23 in. (5.8 mm)
ABS Option
Standard
Front Travel (in./cm.)
5 in. (130 mm)
Rear Travel (in./cm.)
4.4 in. (112 mm)
Electric
Battery
Sealed, maintenance-free, absorbed glass mat (AGM) battery, 12V, 17.5Ah, 310 CCA at 0°F
Battery Charger Type
Three-phase, 48 Amp system (364 Watts @13 Volts, 900 rpm, 624 Watts max power @ 13 Volts, 2000 rpm)
Starter
1.6 kW electric with solenoid shift starter motor engagement
Lighting
Headlamp: All LED, low beam, high beam and signature position lamp | Tail/Stop: LED Buffett tail lamp | Front Signal Lights: LED Bullet Turn Signals | Rear Turn Signals: LED Bullet Turn Signals
Gauges
4-inch (102 mm) analog speedometer with digital gear, odometer, fuel level, ride modes, heated gear, traction control, ABS, TPMS, cruise control, clock, trip, range and tachometer indication
Features
Features
Electric Power Outlet: USB C-Type , Output 5V at 2.4 Amp





